Product Categories
(Total 12 Products for Ctc Nickel Alloy Blended Welding Powder)
Cast Tungsten Carbide Blended PTA Welding Powder
GPNi0105B-2 is a carbide PTA welding powder which mixed by cast tungsten carbide powder and nickel based alloy powder. The welding layer has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear. The welding layer can extend work part service life to 3-5 times. T
60% Spherical Cast Tungsten Carbide Laser Cladiing Powder
GPNi2701B is 60% Spherical Cast Tungsten Carbide powder blend with Nickel alloy powder for Laser cladding process. With higher hardness and anti wearness properity than other alloy powder. Becuase of its special feature, usually is used for the indusry like: Mining, Oil&Gas, Architect etc. Compare with HVOF...
Pure Spherical Tungsten Carbide Powder
GZ100-270Q is Pure Spherical Tungsten Carbide Powder. Hardnes is 3000±300 HV0.3, the highest value compare with other powder. The spherical cast tungsten carbide particles are denser inside the particles, the eutectic structure is finer, and the microhardness is the highest. It is a new type of super wear-resistant...
60% Spherical Tungsten Carbide Blend Powder
GPNi0801B is a blend of spherical fused tungsten carbide and a self fluxing alloy matrix with a matrix hardness of 40 HRC. For this proportion, can reach better anti-wearness with low porosity and crack. The hardness of powder is around 2700-3100 HV0.1. This powder can be used for laser cladding, PTA welding. Compare...
Cast tungsten carbide powder for thermal spray
Products Details: 1.Wonderful wear resistance and erosion resistance
2.Excellent bonding strength and impact toughness
3. Durable sliding resistance
4. Use for wear parts, papermaking rollers, drawing cone, blades of compressor, pump valves Based on decades of production experience of WC based hard-facing materials,...
Cemented Carbide Nickel based Alloy Blended PTA Powder
GPNi0104B is a carbide PTA welding powder which mixed by WC-6Co cemented carbide powder and nickel based alloy powder. The welding layer not only has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear but also has good corrosion resistance to protect parts service in...
Cast Tungsten Carbide and Nickel Alloy PTA Powder
GPNi0103B is a carbide PTA welding powder which mixed by cast tungsten carbide powder and nickel based alloy powder. The welding layer has high hardness and impact toughness to protect parts that exposed in high abrasion and impact wear. The welding layer can extend work part service life to 3-5 times. T
Nickel 20%Chromium Powders for Thermal Spray 15-45um
Nickel – 20% Chromium Powders for HVOF PTA POWDER Thermal Spray Description: Ni-20Cr Metal Spray Powder is an oxidation-resistant thermal sprayed bond coat material used under a variety of thermal sprayed ceramic top coats. They can also be used for repair and buildup coatings. The high chromium content of these...
Nickel 20%Chromium Powders for Thermal Spray 15-38um
Nickel – 20% Chromium HVOF PTA Powder for Thermal Spray Description: Ni-20Cr Metal Spray Powder is an oxidation-resistant thermal sprayed bond coat material used under a variety of thermal sprayed ceramic top coats. This Metal Alloy Powder can also be used for repair and buildup coatings. The high chromium Flame Spray...
Nickel 20%Chromium Powders for Thermal Spray 20-53um
Nickel – 20% Chromium Powders for Thermal
Spray Description:
NICrFeMo Nickel Based Alloy Powder 15-38um
Welding Materials Type: 15-38um NICrFeMo Nickel Based Alloy Powder, Nickel Alloy Powder, Ni Based Powder, Inconel 625 Powder Description:
NICrFeMo Nickel Based Alloy Powder 20-53um
welding materials type: 15-38um NICrFeMo Nickel Based Alloy Powder, Nickel Alloy Powder, Ni Based Powder, Inconel 625 Powder Description:
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.